BC/BCS
The BCS allows for the connection of 2-2x’s to a 4x post or 3-2x’s to a 6x post. Double-shear nailing between beam and post gives added strength! The BC series offers dual purpose post cap/base for light cap or base connections.
Customer Service: 844-382-6081
- Menu
-
Anchors
-
Concrete Anchors
Florida Fastener offers a wide assortment of mechanical anchors for light, medium and heavy duty applications in base materials such as concrete, masonry and drywall. For applications where there is concern about the risk of concrete cracking, specific anchors have been designed and tested to offer increased reliability.
- Concrete Screws Concrete screws are 3/16″ and 1/4″ diameter masonry screws for attaching all types of components to concrete and masonry. Available in hex and phillips head designs in three colors. Use with appropriately sized drill bits included with each box. Warning: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use these products in dry, interior and non-corrosive environments only.
- Concrete Screws – Stainless Steel Stainless-steel masonry screws are ideal for attaching all types of components to concrete and masonry in environments where corrosion is a concern. These screws combine the versatility of our standard masonry screws with the benefits of enhanced corrosion protection. The combination of 410 stainless steel and a protective coating provides excellent corrosion resistance. Available in hex and phillips head, they are designed for use with appropriately-sized drill bits that are included with each box.
- Drop-in Anchors Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2″ and 3/4″ coil threaded rod.
- Sleeve Anchors Sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials. These anchors are available in acorn, hex, or flat head styles for a wide range of applications.
- Titen HD Anchors The Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor can be installed with a standard ANSI tolerance drill bit and is removable. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
- Wedge Anchor – Carbon Steel Wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. Threaded studs are set by tightening the nut.
- Wedge Anchor – Stainless Steel Wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. Threaded studs are set by tightening the nut.
-
Concrete Anchors
Florida Fastener offers a wide assortment of mechanical anchors for light, medium and heavy duty applications in base materials such as concrete, masonry and drywall. For applications where there is concern about the risk of concrete cracking, specific anchors have been designed and tested to offer increased reliability.
-
Bolts
- Galvanized Carriage Bolts Carriage and Timber bolts have no drive, and machine threads for use with a nut.
- Galvanized Hex Bolts Hex bolts have hexagonal heads and machine threads for use with a nut or in a tapped hole. Also known as hex cap screws or machine bolts.
- Galvanized Lag Bolts Lag bolts are large wood screws with hexagonal heads often called a lag screw.
- Concrete Tools
-
Nuts
- Galvanized Hex Nuts Nuts have internal machine threads, for use with machine thread bolts and screws.
- Stainless Steel Hex Nuts Nuts have internal machine threads, for use with machine thread bolts and screws.
- Stainless Steel Nylon Hex Lock Nuts Nylon Insert Locknuts, are also known as Stop Nuts. Nylon insert locknuts feature a nylon filled collar at the back end which restricts movement once a threaded fastener is installed.
-
Washers
- Galvanized Flat Washers Washers are used to spread the load of a bolt or screw over a larger area or to help prevent loosening under vibration.
- Galvanized Spring Lock Washers Split Lockwashers, also known as Helical Spring Lockwashers, are available in a variety of materials and finishes. The offset split ends of the washer create tension when it is clamped down, creating a strong hold.
- Galvanized Square Washers Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections.
- Stainless Steel Flat Washers Washers are used to spread the load of a bolt or screw over a larger area or to help prevent loosening under vibration.
- Stainless Steel Spring Lock Washers Split Lockwashers, also known as Helical Spring Lockwashers, are available in a variety of materials and finishes. The offset split ends of the washer create tension when it is clamped down, creating a strong hold.
-
Simpson Strong-Tie
-
Holdowns and Tension Ties
Holdowns and Tension Ties for wood and masonry
- HD Simpson Strong-Tie offers a wide variety of bolted holdowns offering lowdeflection performance for a range of load requirements. All of these holdowns have been tested in accordance with ICC-ES’s AC 155 acceptance criteria and are approved for use in vertical and horizontal applications.
- HDC The unique design of the HDC holdowns eliminate eccentricity. They install with Simpson Strong-Tie® Strong-Drive® SDS screws (included) to reduce slip and provide a greater net section area of the post compared to bolts.
- HDU HDU Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They use Simpson Strong-Tie® Strong-Drive® SDS screws which install easily, reduce fastener slip and provide a greater net section when compared to bolts.
- LTT/HTT Tension ties offer a solution for resisting tension loads that is fastened with nails. The entire line of tension ties has been tested and evaluated to the requirements of AC155.
- PA/HPA Wood-to-concrete connectors that satisfy engineering and code requirements. The PA is code listed in ICC-ES ESR-2920under the 2009 and 2012 IBC and have been tested to meet the requirements of ICC-ES acceptance criteria AC-398 for cracked and un-cracked concrete
- Girder Tie Downs
- Seismic & Hurricane Ties
-
Joist Hangers
- HGUS/HGUQ These hangers are designed for applications where higher loads are needed (also see HUC and HUCQ). All hangers in this series have double-shear nailing. This patented innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of common nails for all connections. (Do not bend or remove tabs)
- HHUS These hangers are designed for applications where higher loads are needed (also see HUC and HUCQ). All hangers in this series have double-shear nailing. This patented innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of common nails for all connections. (Do not bend or remove tabs)
- HIT/ITS/IUS/MIT/MIU
- HU HU/HUC – Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity and safety factors.
- HUC HU/HUC – Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity and safety factors.
- HUCQ The HUCQ series are heavy-duty joist hangers that incorporate Simpson Strong-Tie® Strong-Drive® SDS screws. Designed and tested for installation at the end of a beam or on a post, they provide a strong connection with fewer fasteners than nailed hangers. See structural composite lumber hangers.
- HUS All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. (Do not bend or remove tabs.)
- HUSC All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. (Do not bend or remove tabs.)
- LGUM
- LSU/LSSU The LSU and LSSU series of hangers may be sloped and skewed in the field, offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right, up to 45°.
- LUS All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. (Do not bend or remove tabs.)
- LUCZ LUCZ concealed flange hanger available for 2×6, 2×8, 2×10 and 2×12 lumber. Ideal for end of ledger/ header or post conditions, the LUCZ also provides cleaner lines for exposed conditions such as overhead decks.
- Masonry Hangers
- MBHU
- SUL/SUR
- THA
-
Post Caps and Bases
Post Caps and Bases
- ABA/ABU/ABW The AB series of retrofit adjustable post bases provide a 1″ standoff for the post, are slotted for adjustability and can be installed with nails, Strong-Drive® SD screws or bolts (ABU). Depending on the application needs, these adjustable standoff post bases are designed for versatility, cost-effectiveness and maximum uplift performance.
- AC/ACE/LPCZ/LCE The LCE4’s universal design provides high capacity while eliminating the need for rights and lefts. For use with 4x or 6x lumber. LPCZ—Adjustable design allows greater connection versatility.
- BC/BCS The BCS allows for the connection of 2-2x’s to a 4x post or 3-2x’s to a 6x post. Double-shear nailing between beam and post gives added strength! The BC series offers dual purpose post cap/base for light cap or base connections.
- CB/LCB LCB and CB are available in rough size. Other sizes available for CB specify W1 and W2 dimensions. Consult Simpson for bolt sizes and allowable loads.
- CBSQ The CBSQ uses Simpson Strong-Tie® Strong-Drive® SDS screws, which allow for fast installation, reduced reveal and high capacity, provides a greater net section area of the column compared to bolts.
- CC/ECC Column caps provide a high capacity connection for column-beam combinations.
- CCQ/ECCQ Column caps provide a high capacity connection for column-beam combinations. This design uses Simpson Strong-Tie®Strong-Drive® SDS screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts.
- CPTZ/CPS
- PB/PBS The PBS features a 1″ standoff height. It reduces the potential for decay at post and column ends.
- Masonry Connectors
- Stud Plates The Stud Plate Tie series offers various solutions for connecting the stud to the top and bottom plates. All models can be used to make a connection to either the top or bottom plate, and several are suitable for double top plates and studs.
- Straps Straps for wood-to-wood and wood-to-masonry connections.
- Header Hangers
- Angles & Gussets
-
Simpson Strong-Tie Screws
In the fastener marketplace, Simpson Strong-Tie stands apart from the rest. Quality and reliability is our top priority. That’s why we hire PhDs, metallurgists, materials engineers, and structural engineers to create the best possible fasteners. And why each production run goes through rigorous testing to ensure our products can handle higher loads, resist corrosion, and make installation more efficient.
- SDWS Timber Screw The Simpson Strong-Tie® Strong-Drive® line of structural fasteners now includes the SDWS Framing screw, designed and load-rated for replacing 16d, 10d and 8d nails in framing applications. The SDWS Framing screw is 0.160″ in diameter and superior to nails in holding power and pull-out resistance. It is code listed under IAPMO UES ER-192 and meets 2009 and 2012 IRC® and IBC ®code requirements for several common wood framing applications. The screw has a SawTooth™ Type-17 tip with serrated threads that makes for fast installations with reduced torque without predrilling, and its specially designed head countersinks easily to provide a clean, flush finish. The T25 bit holds the 6-lobe recess tightly, reducing cam-out and head stripping.
- SDWH Timber Hex Ideal for structural and general-purpose fastening applications where a hex-head drive is preferred. The SDWH structural wood screws are ideal for the contractor and do-it-yourselfer alike. Key Features Bold thread design that provides superior holding power Patented 4CUT™ tip that ensures fast starts, reduces installation torque and eliminates the need for pre-drilling in most applications Under-head nibs that offer greater control when seating the head Large washer head provides maximum bearing area (0.64″ head dia.) Size identification on all SDWH screw heads Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable for certain exterior and preservative-treated wood applications, as described in the evaluation report. Applications Structural Wood-to-Wood Connections Including Ledgers
- SDWH Timber Hex SS Designed for lag-screw replacement, these Type 316 stainless-steel structural wood fasteners require no pre-drilling, making them easier and faster to install than typical lag screws. Ideal for use in marine or wet environments that require a severe-level of corrosion resistance. Key Features Type 316 stainless steel for maximum corrosion protection No predrilling necessary in most applications Load values exceed those of larger diameter lag screws Driver bit included Can be used in ledger applications Unique “box” thread design with raised-ridge technology significantly reduces driving torque and installation time Hex-washer head provides large bearing area
-
Holdowns and Tension Ties
Holdowns and Tension Ties for wood and masonry
-
free shipping
on orders over $500.00
daily promotion
Sed ut perspiciatis unde omnis.
customer care
Hours: 7:30 am-5:00 pm
live chat with us
-
Florida Fastener
sales@floridafastener.com
2286 Bruner Lane
Fort Myers, FL 33912
1-844-382-6081
-
Florida Fastener is a division of K.C. Building Supply LLC. For over 20 years we have offered the best quality products at an affordable rate.
Phone: 1-844-382-6081
Email: sales@floridafastener.com
payment accept
shipping service
© 2017 Florida Fastener. All Rights Reversed. Naples Web Design